Double fold self- locking washers from LML Metal Products Ltd.

Double fold self- locking washers from LML Metal Products Ltd.

LML Self-Locking Washers are used in conjunction with LML weld pins, insul-anchors

and lacing anchors to fasten insulation in place. Simply press the self-locking washer onto the pin -

against the insulation until the desired position is reached and then clip off, or bend over, the

remaining portion of pin for a permanent attachment.

The choice between round or square self-locking washers is basically a matter of aesthetics or

personal preference. The domed, multi-lanced hole design provides for ease of locating washer on

pin and positive self-locking. Some styles of washers are manufactured with a beveled edge to

prevent the washer from cutting into the insulation facing. These washers are available according to

the chart above and with standard 10 GA, 12 GA, or 14 GA hole sizes off-the-shelf. Other

material/plating combinations and hole sizes are available by special order.

Today we specially show some Double fold self- locking washers produced in LML Metal Products Ltd.